Braided from high quality Aramid fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packin
g, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in.
Aramid packing is widely used in various industrial fields, such as chemical industry, oil refining, medicine, food, sugar, paper and electric power, etc. The aramid packing is durable and suitable for wear-resistant media containing solid particles. It is recommended for use in superheated steam, solvents, liquefied gas, syrup and other wear-resistant fluids. Can be used in hot water up to 160 °C without coolant. Aramid packing can be used alone or combined with other packings and placed at both ends as end rings to prevent extrusion.